ShoreLand'r SL70TAL V.1 - Manual (Page 6)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003355
REV C 2/14/06 Page 6
Mount the winch post assembly to the tongue at a
location that best fits your watercraft. Secure the
winch post base weldment (Item #3) to the tongue
using two (2) 1/2” X 3-9/16” X 5” stainless steel
square u-bolts (Item #13) and four (4) 1/2” stainless
steel hex lock nuts with nylon inserts. Mount the
winch post angle tube weldment (Item #4) on the
tongue at a height that would best fit your watercraft
using a 1/2” X 3-9/16” X 5” stainless steel square
u-bolt over the flange as shown in the drawing.
Place the legs of the U-bolt into the winch hold
down clamp (Item #7) and secure with two (2) 1/2”
stainless steel hex lock nuts with nylon inserts.
Diagram P
Winch Post:
6675200
Winch Assembly for 6, 7, 8300 lb. Aluminum Trailers