SMA STP 60-US-10 Installation - Manual (Page 21)

SMA Solar Technology AG 2 Installation
Installation Guide STP60-10-IA-xx-10 21
2 Installation
2.1 Environment and Clearances
Figure 2.1 Avoid constant contact with water
Figure 2.2 Avoid direct solar irradiation
Figure 2.3 Ensure adequate air flow
Figure 2.4 Ensure adequate air flow
Figure 2.5 Mount on non-flammable surface
Figure 2.6 Mount upright on vertical surface. Backwards tilt of up to
ten degrees is permitted.
Figure 2.7 Prevent dust and ammonia gases
INFORMATION
When planning the installation site, ensure that the
inverter product label and warning labels remain
visible. For detailed information, see Section 5,
page 45.