SMA SI 3324 - Manual (Page 17)

SMA Technologie AG Operation / Commisioning
User Manual SI3324/4248-14:FE2406 Page 17
4 Operation / Commisioning
Before the first commissioning of the Sunny Island 3324/4248, read this "Operation"
section and become familiar with the inverter.
4.1 Control Elements
Functions, operating modes, parameters, data and fault messages are all displayed
in the two-line display of the Sunny Island 3324/4248. Use the arrow keys (↑ ↓), the
ESC key, and the ENTER key for navigation. The individual control elements can be
seen in the figure below.
The following table shows the key functions:
The DC circuit breaker switches the Sunny Island 3324/4248 on and off. Note that
all voltage sources (batteries, (stand-alone) grid, generator) must be disconnected
from the Sunny Island 3324/4248 before the inverter is free of voltage (see section
4.2 "Activation and Deactivation" (page 20)).
Key Function
ESC
cancel, NO response, leave current menu, stop the inverter
(hold)
↑ navigate up one menu level, increase data value
↓ navigate down one menu level, decrease data value
ENTER
select a function, select a value, confirm changes, YES
response
ENTER ESC OFF OFF
DC circuit breaker Display
LEDs showing
inverter operation
Control keys