SMA SI 3324 - Manual (Page 18)

Operation / Commisioning SMA Technologie AG
Page 18 SI3324/4248-14:FE2406 User Manual
4.1.1 Explanation of the Light-emitting Diodes (LEDs)
A red LED and a green LED are located on the front side of the Sunny Island 3324/
4248. The following table explains their meaning:
4.1.2 Display
Information about the Sunny Island 3324/4248 is shown on the two-line LCD display.
Two lines are always shown when navigating up and down the menus.
During normal operation, the Sunny Island 3324/4248 shows the relative output
power, the operating mode of the inverter, the generator status (e.g. "L" see section
4.6 "Generator Request" (page 26)), fault messages and the status of the load
shedding and generator control relay.
Green LED Red LED Operating mode
ON ON INIT (initialization phase)
— — Standby
ON — Operation
BLINKING —
Derating
(power reduction)
— ON Fault
[¿¿¿¿¿¿¿¿¿¿¿¿ ]
>Invert L oo E
Output power/charging power
Direction of energy
Load shedding
relay status
Generator status
Request Type
Generator control
relay status
Fault display
Operating mode
Load status