SMA SMC 7000HV Installation - Manual (Page 31)

SMA Solar Technology AG Electrical Connection
Installation Manual SMC70HV11-IA-IEN112970 31
5.4.2 Assembling the DC Plug Connectors
In order to be connected to the inverter, all connection cables of the PV modules must be equipped
with the DC plug connectors provided.
To assemble the DC plug connectors, proceed as follows. Ensure the connectors have the correct
polarity. The DC plug connectors have the symbols "+" and "‒".
Cable requirements:
• Use a PV1-F cable.
Procedure
1. Lead the stripped cable all the way into the
DC connector.
2. Press the clamping clip down.
☑ The clamping clip snaps audibly into place.
3. Ensure the cable is correctly in place:
Result Measure
☑ If the stranded wire is visible in the chamber
of the clamping clip, the cable is correctly
positioned.
• Proceed to step 4.