SMA SMC 7000HV Installation - Manual (Page 50)

Commissioning SMA Solar Technology AG
50 SMC70HV11-IA-IEN112970 Installation Manual
6.2 Display Messages During the Startup Phase
• After commissioning, the inverter displays the device
type in the startup phase.
• After 5 seconds or when you tap again on the
enclosure lid, the firmware version of the internal
processors is displayed by the inverter.
• After a further 5 seconds or when you tap again, the
configured country standard is displayed by the
inverter (example: "GER/VDE 0126-1-1").
Show display messages again (valid from firmware version 2.10)
If you want to view the display messages of the startup phase again while in normal
operation, double tap the enclosure lid.