Yaskawa GPD333 - Manual (Page 2)

DWG. NO. 02Y00025-0351
SHEET NO. 2 OF 7
EFF. 12/7/93
(m-df )
Refer to Sheet 1 for latest change.
Table 1
Drive Braking Resistor Unit
Voltage HP(CT) Part Number H W D H1 W1 Mtg Screws
1/4 —— — — — — — ——
2 3/4 5P41-0742 13.00 12.00 5.00 9.00 11.00 3/4 (4)
3
1 5P41-0742 13.00 12.00 5.00 9.00 11.00 3/4 (4)
1.5 5P41-0743 13.00 12.00 5.00 9.00 11.00 3/4 (4)
0 3 5P41-0744 13.00 12.00 5.00 9.00 11.00 3/4 (4)
5 5P41-0745 13.00 12.00 5.00 9.00 11.00 3/4 (4)
1/2 —— — — — — — ——
4 3/4 5P41-0752 13.00 12.00 5.00 9.00 11.00 3/4 (4)
6
1.5 5P41-0752 13.00 12.00 5.00 9.00 11.00 3/4 (4)
2 5P41-0753 13.00 12.00 5.00 9.00 11.00 3/4 (4)
0 3 5P41-0754 13.00 12.00 5.00 9.00 11.00 3/4 (4)
5 5P41-0755 13.00 12.00 5.00 9.00 11.00 3/4 (4)
Figure 1. Braking Resistor
(3% Duty Cycle)
RECEIVING
All equipment is tested against defect at the factory.
Report any damages or shortages evident when
equipment is received immediately to the commercial
carrier who transported the equipment. Assistance, if
required, is available from your MagneTek sales
representative.
STORAGE
If the option is not to be installed immediately, it must
be stored under the following conditions:
– Ambient temperature: -10 to +40° C.
– Protected from rain and moisture.
– Free from corrosive gases or liquids.
– Free from dust or metal particles.
– Clean and dry.
– Free from excessive vibration.