Yaskawa F7 Configured Drive - Manual (Page 6)

Yaskawa Electric America, Inc – www.drives.com
IG.F7C.01 Page 6 of 7
Date: 3/5/04
Heatsink Filter Kit Option
For F7 Configured Drive
Refer to Figure 6 – Filter housing assembly
(11)
Mount top filter housing to filter duct using the (2) captivated screws provided with each housing. The
housing has a clearance slot that must be properly aligned with the exposed screw on the back of the
enclosure. Repeat process for the bottom filter housing.
Clearance slot
Figure 6 – Top filter housing assembly
IMPORTANT
•
Never exceed the rated torque specifications when tightening screws.
o 18 lb‚in (2.03 N‚m) for #8-32 screws
o 30 lb‚in (3.39 N‚m) for #10-32 screws
•
Partially insert and torque all screws prior to tightening to the rated torque specification.
•
Tighten the screws in a cross like pattern to prevent damage to the threads.