Wiring, 1 terminal position, 1 dc input enclosure – Yaskawa Varispeed-656 DC5 System Regen Converter User Manual
Page 15: Å° 400v-class/200kw, 575v-class/300kw, Figure 4.1, Terminal position, Dc input enclosure
VS-656DC5 Enclosure Installation Manual
13 - 23
4. Wiring
Connect the cabling to the enclosure while referencing the wiring connection diagram pro-
vided by Yaskawa. Enclosure inputs and outputs may be led-in by relaying the cables through
the I/O terminal block.
4.1 Terminal Position
4.1.1
DC Input Enclosure
■
■
■
■ 400V-Class/200kW, 575V-Class/300kW
• Install this unit after verifying that the input power is OFF. Failure to do so
may lead to electric shock or fire.
• Wiring should be performed by a skilled electrician. Failure to do so may lead
to electric shock or fire.
• Be sure to ground the grounding terminal. Failure to do so may lead to electric
shock or fire.
WARNING
Output Side
(Main Circuit)
Convertor Module
1TB (Control Circuit Terminal Block)
2TB (General Terminal Block)
Cabling
(Control Circuit)
Cabling Input
(Main Circuit)
Figure 4.1