One-touch and speed dial faxing, One-touch faxing – Epson X-PRF 1000 User Manual
Page 33
Using th e PriorityFax
AUTO ANS
ON OFF
One-touch and Speed
Dial Faxing
One-touch Faxing
Registering one-touch fax
To register the one-touch fax numbers, first set the
TONE/PULSE
numbers
switch as described on page 3-2 Then follow the steps below:
Do not touch the received document until it is completely
out
of
the front paper slot. Pulling on a document that is still coming out
of the fax machine can decrease the image quality.
Don’t worry about missing a
fax
if you leave the
AUTO ANS
switch off and are away and unable to answer your telephone.
After ten rings with no answer, the fax machine begins automatic
reception anyway.
You can dial the fax numbers you use most often by pressing only
one key (for up to three numbers) or only three keys (for up to 17
more numbers). Once you register them with the procedures
described below, the numbers are in the memory of the PriorityFax
for easy access.
You can register up to three fax numbers for dialing frequently
called numbers by pressing just
one
button. If you prefer using the
one-touch feature for telephone numbers, see Chapter 3.
Lift the telephone handset and look at the handset buttons. The
large button at the bottom
is the DIAL TONE RESET
button,
which is shown below.
Dial Tone Reset