Epson X-PRF 1000 - Manual (Page 35)

Using the PriorityFax
Speed Dial Faxing
Registering speed dial fax
numbers
STORE
MEMORY
O P E R D E F
You can register up to 17 speed dial numbers for dialing
frequently called fax numbers by pressing STORE/MEMORY and
two number keys. Fist you must register the fax numbers.
Note
Speed dial may be used for telephone numbers as well as
fax numbers.
To register the speed dial numbers, follow the steps below:
While holding down the DIAL TONE RESET button (which is
shown on page 2-9), enter a telephone number using the keypad.
If you are using an international access code, press REDIAL after
the code and before the rest of the number. Also, if your telephone
system requires a code such as 9 before a telephone number, press
REDIAL to enter a pause after the code. You may enter a maximum
of 16 digits for each speed dial number. (A pause counts as one
digit.)
Press STORE/MEMORY.
Because speed dial numbers are 03 through 19, enter 03 to register
the first speed dial fax number.
Release the DIAL TONE RESET button. The number you entered
is
now stored and
can be dialed by pressing STORE/MEMORY
and then 03 on the keypad.
Write down an identification next to 03 on the Memory Index label
on the telephone cradle.
2-11