KACO Powador-protect - Manual (Page 20)

Page 20
A
7.2 AC connection
DANGER
Risk of fatal injury due to electric shock
Severe injury or death will result if the live connections are
touched.
› Before all work, ensure that there is absolutely no volt-
age present.
NOTE
In the system installation, a switch or circuit breaker must be
fitted as a disconnection unit. This must
› be suitably positioned
› to be accessible for the user
› be marked as a disconnection unit for the device
7.2.1 AC connection with the wire jumper provided
↻ Observe the input voltage
↻ Observe the cable cross-sections
↻ Use a suitable fuse
↻ The tie circuit-breakers used must be AC supplied
1. Remove the cover of the pre-stripped wire end of the wire
jumper
2. Connect screw terminals L1, 11 and 21 to the 3 connections of
the wire jumper fitted with wire sleeves