KACO blueplanet 1502xi User Manual

Instruction manual

Advertising

This manual is related to the following products:

blueplanet 2502xi blueplanet 3502xi blueplanet 5002xi

Table of contents

Document Outline

General Notes
1 About This Documentation
- 1.1 Retention of documents
- 1.2 Symbols used in this document
- 1.3 Name plate
2 Safety Instructions and Regulations
3 Notes on Installation and Operation
- 3.1 Intended use
- 3.2 Factory warranty and liability
- 3.3 Service
4 Operation
- 4.1 Overview of controls and displays
- 4.2 LED displays
- 4.3 Keys “1” and “2”
- 4.4 Level 1 menu – Display mode
- 4.5 Level 2 menu – Configuration mode
- 4.6 DC/AC switch
- 4.7 Night time start switch
- 4.8 The RS485 interface
- 4.9 Display
5 Accessories
6 Troubleshooting
7 Recycling and Disposal
1 About This Documentation
- 1.1 Retention of documents
- 1.2 Symbols used in this document
- 1.3 Name plate
2 Safety Instructions and Regulations
3 Technical Data
4 Unit Description
- 4.1 Included in box
- 4.2 Designing the PV array
- 4.3 Protection concepts
- 4.4 Dimensions and weights
- 4.5 Inverter knockout dimensioning
5 Installation and Start-Up
- 5.1 Selecting an appropriate place for installation
- 5.2 Installing the inverter
- 5.4 Grounding the inverter
- (A) Grounding single inverters:
- (B) Grounding multiple inverters:
- 5.5 Connecting to the Public Grid
- 5.6 Electrical connection
- (A) Grid Connection
- 5.7 Interfaces
- (A) Connecting the fault signal relay
- (B) Connecting the S0 output
- (C) The RS485 interface connection
- 5.8 Starting up the inverter
- 5.9 Parameter programming
6 Two-Stage Shutdown in Accordance with IEEE(standard values for < 30 kW)
7 Maintenance
- 7.1 Cleaning the fan
- 7.2 Removing the fan
8 blueplanet as Part of a PV Installation
- 8.1 Design of installation
- 8.2 Installation with multiple inverters on a three phase system
9 Troubleshooting
10 Efficiency curves
11 Compliance Certificates