Lanner FW-7575 - Manual (Page 14)

9
Hardware Setup
Chapter 2
Network Application Platforms
Installing the PCIe Riser Card
FW-7575 provides one PCIe expansion golden finger for
either standard PCI-E add-on card or Ethernet expansion
module installation. The Ethernet expansion module
is installed through the front panel slot whereas the
standard PCI-E Add-on card is installed through the back
slot. In order to install the PCIe expansion module, you’ll
need to install the riser card first. Follow the procedures
below for installing PCIe expansion card.
Align the riser card and the card slot 1.
Push the card to insert into the connector. 2.
Secure the card by fastening with screws. 3.
Riser card for PCIe expansion for Ethernet module installation
through the front panel
Riser card for PCIe expansion (standard low profile and half
length) installation through the back panel