Lanner FW-7575 - Manual (Page 27)

22
Bios Settings
Chapter 4
Network Application Platforms
SATA Mode Selection
The system supports various SATA mode.
Item Selection
IDE Mode Set to IDE mode when your want to use the
Serial-ATA hard disk drives as Parallel ATA physical
storage devices.
AHCI Mode Set to AHCI mode when you want the SATA
hard disk drives to use the AHCI (Advanced
Host Controller Interface). The AHCI allows the
onboard storage driver to enable advanced SATA
features that increases storage performance or
workloads where multiple simultaneous read/
write requests are outstanding, most often
occurring in server-type applications (native
command queuing). It also facilitates hot
swapping.
Disable Disable the SATA controller.
Serial ATA Port 0/1
Use this menu to configure specific SATA Port for all ports
on the system.
Option Description
Staggered
Spin-Up Spin-up is a simple mechanism by which the
storage subsystem controller can sequence
hard disk drive initialization and spin-up. Set to
control whether each specific drive will spin up.
Hot Plug The AHCI of SATA provides hot plug capability
to allow drives to be added or removed with the
PC running.