Lanzar AQCD60BTS - Manual (Page 13)

13
OPERATION
2. label side or the recording side of any
discs, as it may cause a malfunction.
3. Dirt, dust, scratches and warping
discs will cause malfunction.
B. Notes on CD-Rs (recordable
CDs)/CD-RWs (rewritable CDs):
1. Be sure to use discs with following
marks only for the unit to play:
2. The unit cannot play a CD-R and
CD-RW that is not finalized. (Please
refer to the manual of your
CD-R/CD-RW recorder or
CD-R/CD-RW software for more
information on finalization process).
3. Depending on the recording status,
conditions of the disc and the
equipment used for the recording,
some CD-Rs/CD-RWs may not be
played on this unit. (see *1)
*1: To have more reliable play back, please
see following recommendations:
a: Use CD-RWs with speed 1x to 4x
and write with speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x and
write with speed 1x to 2x.
c. Do not play a CD-RW which has
been written for more than 5 times.
C. Notes on MP3 files (MP3 Version
Only):
1. The disc must be in the ISO9660 level 1
2. or level 2 format, or Joliet or Romeo in
the expansion format.
3. When naming a MP3 file, be sure the
file name extension is “.MP3”.
4. For a non-MP3 file, even though the file
name extension is “.MP3”, the unit
cannot recognize it.
USB PLAY OPERATION
In the front panel of the unit, there is an
USB interface (15). You can connect an
USB driver through this interface (15).
When you connect an USB driver through
the interface, the unit will search the MP3
files or WMA files in the USB driver and
start to play MP3 files or WMA files
automatically.
If in other mode, you can also press MOD
button (9) to select USB mode.
Note：

The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
 USB MP3 player is not a standard
which means different brand name or
different models have their own
standard. So our product cannot
support every MP3 player.
 When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3
player then connect it to the USB
interface. Otherwise, it may cause
battery burst.
SD/MMC OPERATION (OPTIONAL)
According to the customer’s need, the unit
will add a SD/MMC interface. See below,
the SD/MMC interface is on the housing of
the unit.
When you insert a SD/MMC card in the
SD/MMC interface, the unit will search the
MP3 files or WMA files in the card and start
to play MP3 files or WMA files automatically.
The operation is the same with the MP3
operation described above. If in other
mode,
you can also press MOD button (9) to elect
ReWritable