Lanzar AQCD60BTS - Manual (Page 15)

 PAIRING
OPERATION
1) In any mode, press and hold
PAIR(MODE) button (9) on the front
panel, “PAIRING” will appear on the
LCD.
2) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile
phone on how to operate Bluetooth.)
3) “CARBT” should appear in the list on
your mobile phone, please select
“CARBT” and then input password
“0000” .
4) When successful paired, “CONN
OK!” will be displayed on LCD.
5) When pairing failed, “PAIR END” will
be displayed on LCD. You can press
and hold PAIR button (1) to try the
pairing again.
6) Note:
During Pairing, MODE key will no
functional during pairing mode. When
pairing, you can press PAIR button (9)
to terminate the pairing.
 CONNECT
This unit is built-in auto-reconnection
function. Every time when you short
press
button (24), the unit will auto
reconnect with the mobile phone (note:
the mobile phone must have been
paired with the unit before.).
In the following conditions you can
reconnect manually by pressing
RECON
button (25) for several
seconds, when reconnect is successful
“Conn OK!” will be displayed.
1) If the mobile phone is out of range,
the connection will be lost, when you
come back to the unit, reconnection is
necessary.
2) When the mobile phone is out of
range from the unit, and there is an
incoming call, when you come back to
the unit, and you want to transfer the
audio to the unit, you need to
reconnection.
3) When you press button (1) to
release the front panel, the connection
will be break off. When you install the
front panel, you need to reconnection.
4) If you turn off the mobile phone that
has paired with the unit, when you
turn on the mobile phone, you need to
reconnection.
 T-MENU
When successful paired, shortly press
T-MENU
button (10) on the front panel
will enter the telephone menu, keep
pressing this button or press
/
button (2/3) to change the items in this
menu. The items will be displayed in
the following sequence: PRE NUM/
RECELVED / DIALED / MISSED /
PHONE BK / MANU ANS / TALK.
The details please see the following
instruction.
1) RRE NUM: You can save 10
phone-call to the phonebook 1. In
PRE NUM mode, rotating button (22)
to select the NUMBER. Then press
SEL button, and enter the phone
number. Then press SEL button again
to save it to phonebook 1.
If you want to delete a number from
phonebook 1. After Selected the
number then press and hold
BND/LOU/
key for 2 seconds.
The number will be deleted.
2)RECELVED: Display the last call you
have received (memory 10 numbers).