Bang & Olufsen BeoVision 10 User Guide - Manual (Page 34)

34
The HDMI Matrix feature is an
additional feature which can be
purchased separately. When the
purchased feature activation key
is entered, additional software
becomes available in your
television. The HDMI Matrix itself
is a physical product that can be
connected allowing you to
connect up to 32 external
sources to your television and
access them via the Beo6 remote
control. For information about
additional features, contact your
Bang & Olufsen retailer.
HDMI Matrix
The HDMI Matrix must be connected
and set up by your Bang & Olufsen
retailer.
– Your Beo6 remote control must be
reconfigured before you can use the
HDMI Matrix.
– You cannot operate the HDMI Matrix with
a Beo4 remote control.
– You cannot connect more than one HDMI
Matrix in a setup.
– The HDMI Matrix cannot be configured on
an HDMI Expander.
Settings in the HDMI MATRIX menu …
In the HDMI MATRIX menu, you can select
settings for your HDMI Matrix.
In the CONNECTIONS menu …
> Open the HDMI MATRIX menu.
> Set the field MATRIX to YES.
> Set the field INPUTS to at least the same
number of sources as you have connected.
> Select an IR socket. You cannot select
NONE.
> Select an IR TYPE to indicate how the TV
control is connected to the HDMI Matrix.
> Select an HDMI socket. You cannot select
NONE.
> Press the centre button to store the
HDMI MATRIX menu.
> After you have stored your settings, select
an HDMI Matrix type.
> Press the centre button to store the
settings.
If you at a later time disable a stored HDMI
Matrix configuration by setting the HDMI
Matrix field to NO, your settings for INPUTS
are still saved. This means that if you set the
field to YES later, the settings reappear.
Important information
HDMI MATRIX
MATRIX YES
INPUTS 16
IR SOCKET
PUC1
IR TYPE PLUG
HDMI A