Bang & Olufsen BeoVision 10 User Guide - Manual (Page 5)

5
MENU LANGUAGE … You can select the
language for on-screen menus. The text
on the screen changes as you move from
language to language.
STAND ADJUSTMENT … Set the maximum
angle for turn for the television. Use and
to turn the television and limit the
movement of the stand.
STAND POSITIONS … Set your preferred
preset positions for the television. For
further information about the STAND
POSITIONS menu,
see page 7 .
TUNER SETUP … Disable the television tuner
or DVB tuner, if you like, see page 8 .
STANDBY SETTINGS … The television can be
set to switch itself to standby after some
time with no operation. You can also switch
power saving on or off,
see page 31 .
CONNECTIONS … Select the type of
equipment you have connected to each
socket, the sockets used, the product
name, and the source name. For further
information about the CONNECTIONS
menu,
see page 9 .
CHECK AERIAL CONNECTION … This
prompt only appears, if the television
tuner is enabled.
AUTO TUNING … When you have registered
your connected equipment, a menu for
channel tuning automatically appears on
the screen. Press the centre button to
start auto tuning. The television finds all
available channels. For further information
about tuning TV channels,
see page 19 .
SPEAKER TYPE … In this menu, you select
which speakers are connected to the
television, if any.
See page 20 for further
information.
SPEAKER DISTANCE … In this menu, you
select the distance in metres to each of
the speakers in your setup (only
BeoVision 10–40/46).
SPEAKER LEVEL … In this menu, you can
adjust the volume level of each speaker in
your setup (only BeoVision 10–40/46).
ADJUSTMENT … In this menu, you can
adjust bass, volume, treble, etc.
DVB SETUP … If the DVB-HD tuner is
enabled, the DVB SETUP menu appears,
see the separate DVB-HD guide for further
information.
For information about where to connect
extra equipment, see the chapter about
connection panels in Getting Started.
First-time setup
The setup procedure is activated
when the television is connected
to the mains and switched on for
the first time. You are led
through an automatic series of
on-screen menus in which you
must register the extra equipment
you have connected, such as
loud speakers.
If you change your setup at a later
date, you can access the same
menus and update your settings.
Remember that you need to set
the speaker types and the
distances in the SOUND menu.
The sequence of menus in first-time setup