Personal protective equipment, Machine¢s safety equipment, Throttle lock – English Leather 245R/RX User Manual

Page 4: Stop switch, Safety instructions, Machine ′′′′ s safety equipment

Advertising
background image

4 –

English

SAFETY INSTRUCTIONS

Personal protective equipment

HELMET

A helmet should be worn if the trees being cleared are taller
than 2 m.

HEARING PROTECTION

Wear hearing protection that provides adequate noise
reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then
you must also wear approved protective goggles. Approved
protective goggles must comply with standard ANSI Z87.1 in
the USA or EN 166 in EU countries. Visors must comply with
standard EN 1731.

GLOVES

Gloves should be worn when necessary, e.g., when fitting
cutting attachments.

BOOTS

Wear sturdy, non-slip boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing
that can catch on twigs and branches. Always wear heavy,
long pants. Do not wear jewellery, shorts sandals or go
barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a first aid kit nearby.

Machine

′′′′

s safety equipment

This section describes the machine

s safety equipment, its

purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the ”What is
what?” section to locate where this equipment is positioned
on your machine.

The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not carried
out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact
your nearest service workshop.

Throttle lock

The throttle lock is designed to prevent accidental operation
of the throttle control. When you press the lock (A) (i.e. when
you grasp the handle) it releases the throttle control (B).
When you release the handle the throttle control and the
throttle lock both move back to their original positions. This
movement is controlled by two independent return springs.
This arrangement means that the throttle control is
automatically locked at the idle setting.

Stop switch

Use the stop switch to switch off the engine.

IMPORTANT! Whenever you use a clearing saw,
brushcutter or trimmer you must wear personal protective
equipment that is approved by the authorities. Personal
protective equipment does not eliminate the risk of
accidents, but it can reduce the effects of an injury in the
event of an accident. Ask your dealer for help when
choosing protective equipment.

!

WARNING! Listen out for warning signals or
shouts when you are wearing hearing
protection. Always remove your hearing
protection as soon as the engine stops.

!

WARNING! Never use a machine that has
faulty safety equipment! Carry out the
inspection, maintenance and service
routines listed in this section.

Advertising
This manual is related to the following products: