Epson ACULASER C3800 - Manual (Page 18)

Safety Instructions 18
EPSON AcuLaser C3800 User's Guide
Laser safety labels
w
Warning:
The performance of procedures and adjustments other than those specified in the printer’s
documentation may result in hazardous radiation exposure.
Your printer is a Class 1 laser product as defined in the IEC60825 specifications. The label
shown is attached to the back of the printer in countries where required.
Internal laser radiation
This is a Class III b Laser Diode Assembly that has an invisible laser beam. The printer
head unit is NOT A SERVICE ITEM, therefore, the printer head unit should not be opened
under any circumstances. An additional laser warning label is affixed to the inside of the
printer.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is
produced only when the printer is printing.
Ozone exposure limit
The recommended exposure limit for ozone is 0.1 parts per million (ppm) expressed as an
average time-weighted concentration over an eight (8) hour period.
The Epson laser printer generates less than 0.1 ppm for eight (8) hours of continuous
printing.
Max. Average Radiation Power: 5 mW at laser aperture
Wavelength: 770 to 800 nm