Thick paper and extra thick paper – Epson ACULASER C3800 User Manual
Page 44
Paper Handling
44
EPSON AcuLaser C3800
User's Guide
When loading labels, you should make paper settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray
Note:
❏ You should only use labels designed for laser printers or plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with printer parts, always use labels that
completely cover the backing sheet, with no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks, do not use those labels
in your printer.
❏ You may have to make the setting Thick* for Paper Type in the Setup Menu.
* When using especially thick labels, set Paper Type to ExtraThk.
Thick paper and extra thick paper
You can load thick paper (106 to 163 g/m²) or extra thick paper (164 to 216 g/m²) into the
MP tray.
When loading thick or extra thick paper, you should make paper settings as shown below:
❏ Duplex printing is not available for extra thick paper.
❏ Make settings on the Basic Settings in the printer driver.
❏ You can also make these settings on the Tray Menu in the control panel. See "Tray
Paper Size:
A4 or LT
Paper Source:
MP Tray (up to 15 mm thick stack)
Paper Type:
Labels
Paper Size:
A4, A5, B5, LT, HLT, EXE, GLT
Paper Source:
MP Tray (up to 15 mm thick stack)
Paper Type:
Thick, Thick (Back), or Extra Thick