Elecom WRH-733Gxx 設定手順書(他言語版) User Manual

Wrh-733gxx, Rt/cv ap reset, 连接无线lan路由器

Advertising
background image

-1-

Names and Functions of Parts

Using a LAN cable sold separately or provided by the hotel,

connect a LAN port in your hotel room to the product's ETHERNET port.

Use one of the following methods to supply power to the

product.

Check that this product's lamps are as shown below:

Smartphones and tablet PCs

(iOS/Android)

Install the simple setup application "QR link" (free of charge),

and then configure the settings.

*For iOS devices, models with iOS 4.0 or above and models with a camera are supported.

For Android devices, models with ver. 2.1 or above and models with a camera are supported.

(Devices with an auto-focus function for the camera are recommended.)
*For devices without a camera, or devices that cannot install the application during setup,

refer to "Cannot Connect to App Store or Google Play" below for manual setup.

WRH-733Gxx

Simple Manual

English

Connect the wireless LAN router

(Router mode) (Access point mode)

Procedure

Using a separately sold USB power supply adapter and a

separately sold USB (Micro-B to Micro-A) cable

Using a PC USB port and a separately sold USB (Micro-B to

Micro-A) cable

Using the included AC adapter

Procedure

Perform connection settings

with each device

From your terminal, open the AppStore (iOS) or Google Play

(Android), search for [QR link], and then install the software.

Follow the instructions on the screen, and then tap [Close]

Tap [Read QR Code] to read the QR code printed on the

included "Setup Information Sheet."

On your terminal's home screen, tap the [QR link]

icon.

Top

Bottom

RT/CV

AP

RESET

LA

N

W

A

N

DC IN

Back

Left side

PWR

WPS/Reset

2.4GWLAN

5GWLAN

LAN

WAN

各部分的名称和作用

WRH-733Gxx

简易版用户手册

中文

连接无线LAN路由器

步骤

Mac OS (Wireless LAN connection)

Click the [Apple menu] in the upper left of the screen, and

then click [System Preferences].
Click [Network].
Check that "Status" for the AirMac (Wi-Fi) has changed to "On."

A password entry screen will be displayed, so enter the

(13-digit) encryption key written on the "Setup Information

Sheet," and then click [OK].

Depending on the hotel, the Web browser (including Safari) may require certification.

In this situation, check with the hotel regarding how to certify your device.

From the list of networks, select the network that has the

same SSID as the network written on the included "Setup

Information Sheet."

* Two SSIDs, one for 2.4 GHz and one for 5 GHz, will be displayed, so select the

Windows (Wireless LAN connection)

Windows 8.1/8

Windows 7/Vista/XP

Point to the upper-right corner of the screen to display the

Charms bar, and then click [Settings].

From the list of networks, select the network that has the

same SSID as the network written on the included "Setup

Information Sheet," and then click [Connect].

Click the wireless icon .

lower-right corner of the screen.
From the list of networks, select the network that has the

same SSID as the network written on the included "Setup

Information Sheet," and then click [Connect].

* Two SSIDs, one for 2.4 GHz and one for 5 GHz, will be displayed, so select the

* "xxxxxx" must be a random string of 6 alphanumeric characters (0-9, a-f).

* "yyyyyyyyyyyyy" must be a random string of 13 numbers.

*If a Web browser is automatically opened, click "Enable access".

* Two SSIDs, one for 2.4 GHz and one for 5 GHz, will be displayed, so select the

*If no message appears, input the "Encryption key" (13 digits) from the included

"Setup Information Sheet", and click [OK].

Check that the message "You can also connect by pushing

the button on the router." is displayed.
Hold down the product's [WPS] button for approximately 5

seconds. When you release the button, the product's "WPS/

Reset lamp" will start to blink in red.
If a screen is displayed with the message "Do you want to turn

on sharing between PCs and connect to devices on this

network?," click "Yes, turn on sharing and connect to devices."

When the "Connect to a Network" dialogue box is

displayed, check that the message "You can also connect

by pushing the button on the router." is displayed.

Hold down the product's [WPS] button for approximately 5

seconds. When you release the button, the product's "WPS/

Reset lamp" will start to blink in red.
Eventually, the "Connect to a Network" dialogue box will

disappear automatically.

LAN port (black)

Connect this product with a PC using a LAN cable.

The LAN port is also used when changing this product's settings

a

from

PC.

WAN port (blue)

Use a LAN cable to connect this product to the hotel's LAN port.

Power supply jack

(DC IN) (microUSB)

Connect the included AC adapter.

By using a separately sold USB (Micro-B to Micro-A) cable, it is also

possible to supply power to the product via USB.

PWR lamp

(white)

Lit

The power is on.
The power is

WPS/Reset lamp

(red)

Lit

The reset function is starting.

Blinking

The WPS function is in operation.
The product is operating normally.

2.4GWLAN lamp

(white)

Lit or blinking

The connection with the 2.4 GHz wireless side is being established.
The 2.4 GHz wireless is off or not connected.

5GWLAN lamp

(white)

Lit or blinking

The connection with the 5 GHz wireless side is being established.
The 5 GHz wireless is off or not connected.

LAN lamp

(white)

Lit or blinking

A wired connection is established with the PC side.
A wired connection is not established with the PC side.

WAN lamp

(white)

Lit or blinking

The connection with the WAN side is being established.
The product is disconnected from the WAN side.

WPS button

Hold down this button for approximately 1 to 9 seconds to start the

WPS function.

Reset button

Hold down this button for 10 seconds or more to start the reset function.

Mode selector switch Switch between router mode (RT), converter mode (CV), or access point mode (AP).

*Use WEB UI to switch between router mode and converter mode.

PWR lamp

Lit in white

WAN lamp

Lit in white or blinking in white

2015/02/06 Ver.1

This section explains how to connect each device.

PC (Wired LAN connection)

Connect this product's LAN port with a PC using a LAN cable.

* Depending on the PC's settings, it may be necessary to change the PC's IP address

settings (automatically obtained or static).

Mac Computer with Wireless LAN Connection

Windows Computer with Wireless LAN Connection

Win/Mac Computer with Wired LAN Connection

*It takes approximately 30 seconds to reach these statuses after the power is turned on.

用以下的任一方法接通电源。

用另售的USB供电适配器+另售的USB(microB-A)电缆供电

用电脑的 USB 端口+另售的 USB(microB-A)电缆供电

用附带的 AC 适配器供电

将另售或者酒店内设置的LAN 电缆连接到酒店客房内的

局域网端子和本产品的ETHERNET 端口。

确认本产品指示灯的状态是否如下所示。

PWR 指示灯

WAN 指示灯

白色亮灯或者白色闪烁

白色亮灯

※从接通电源到进入本状态大约耗时30秒。

Windows (无线局域网连接)

Windows 8.1/8

Windows 7/Vista/XP

将鼠标器放到屏幕右上角,出现超级按钮栏,点击[设置]。

点击无线的图标 。

点击屏幕右下方任务栏上的无线局域网的图标。

智能手机/平板电脑

(iOS/Android)

安装简单设置应用程序“QR link”(免费),进行设置。

按照屏幕上的指示,最后触摸[关闭]按钮。

触摸[QR 码读取],读取附带的“ 设置信息表 ”上打印的
QR 码。

触摸智能手机或平板电脑的主屏上的[QR link]图
标。

▲到此,设定就完成了。

▲到此,设定就完成了。

▲到此,设定就完成了。

▲到此,设定就完成了。

▲到此,设定就完成了。

从网络列表中选择与附带的“ 设置信息表 ”上所记载的相
同的 SSID,并点击[连接]按钮。

※会显示2.4GHz和5GHz的2个SSID,请根据所连接的设备的规格进行选择。

确认“ 按下路由器的按钮也能连接。”的消息。

长按本产品的[WPS按钮]5 秒钟左右后放开,本产品的

“WPS/Reset 指示灯 ”开始红色闪烁。

弹出“ 启用电脑共享 ...”窗口后,点击“ 是,启用共享并连
接到设备 ”。

从网络列表中选择与附带的“ 设置信息表 ”上所记载的相
同的 SSID 并点击[连接]按钮。

※会显示2.4GHz和5GHz的2个SSID,请根据所连接的设备的规格进行选择。

弹出“连接网络”的窗口后,确认“按下路由器的按钮也

能连接。”的消息。

长按本产品的[WPS按钮]5 秒钟左右后放开,本产品的

“WPS/Reset 指示灯 ”开始红色闪烁。

Mac OS(无线局域网连接)

点击屏幕左上方的[苹果菜单],点击[系统环境设置]。

点击 [ 网络 ]。

确认 AirMac (Wi-Fi) 的“ 状况 ”为“ 启用 ”。

从“ 网络名称 ”列表中选择与附带的“ 设置信息表 ”上所
记载的相同的 SSID 。

弹出密码输入窗口,输入“设置信息表 ”所记载的密钥(13
位数)并点击[确定]。

※会显示2.4GHz和5GHz的2个SSID,请根据所连接的设备的规格进行选择。

电脑(有线局域网连接)

※对有的电脑设置,可能要改变电脑IP地址的设置(自动取得或固定)。

通过有线局域网连接Win/Mac电脑时

通过无线局域网连接Windows电脑时

通过无线局域网连接Mac电脑时

步骤

进行与各设备的连接设置

(路由器模式)

(访问点模式)

针对要连接的每个终端说明连接步骤。

※iOS终端支持iOS4.0以后且带摄像头的型号。Android终端支持Ver.2.1以后且带摄像头的型号。

(推荐配备有自动对焦功能的摄像头终端。)
※未配备摄像头的终端、设定时不能安装应用程序的终端请参照下方的

“不能连接AppStore或者Google Play时”,手动设定。

有的酒店需要通过网络浏览器(Safari等)进行认证作业。

此时,请向您住宿的酒店确认认证方法。

用 LAN 电缆将电脑和本产品的局域网端口相连接。

从智能手机或平板电脑打开 AppStore(iOS)或

Google Play(Android),搜索[QR link]并安装。

※在“xxxxxx”中填入6位0~9、a~f的随机英文字母和数字。

※在“yyyyyyyyyyyyy”中填入13位随机数字。

※网络浏览器自动启动时,点击“将访问设为有效”。

※没有显示消息时,手动输入附带的“设置信息表”内的“密钥”

(13位)后,点击“OK”

顶部

底部

RT/CV

AP

RESET

LA

N

W

A

N

DC IN

背面

左侧面

PWR

WPS/Reset

2.4GWLAN

5GWLAN

LAN

WAN

LAN 端口(黑色) 用 LAN 电缆将本产品和电脑相连接。

也用于从电脑改变本产品的设置。

WAN 端口(蓝色)用 LAN 电缆连接本产品和酒店的局域网端子。
电源插孔(DC IN)

(microUSB)

连接附带的 AC 适配器。

通过使用另售的USB(microB-A)

电缆,还能给USB供电。

PWR 指示灯

(白色)

亮灯

电源接通状态

熄灭

电源切断状态

WPS/Reset 指示灯

(红色)

亮灯

重置功能启动

闪烁

WPS 功能工作中

熄灭

通常时

2.4GWLAN 指示灯

(白色)

亮灯・闪烁 与 2.4GHz 无线侧连接着
熄灭

2.4GHz无线关闭或者未连接的状态

5GWLAN 指示灯

(白色)

亮灯・闪烁 与 5GHz 无线侧连接着
熄灭

5GHz无线关闭或者未连接的状态

LAN 指示灯

(白色)

亮灯・闪烁 与电脑侧有线连接着
熄灭

未与电脑侧有线连接的状态

WAN 指示灯

(白色)

亮灯・闪烁 与 WAN 侧连接着
熄灭

未与 WAN 侧连接的状态

WPS 按钮

按住约 1 ~ 9秒后,WPS 功能启动

Reset 按钮

按住 10 秒以上后,重置功能启动

模式切换开关

切换路由器模式(RT)/变换器模式(CV)、访问点模式(AP)

※路由器模式与变换器模式从WEB UI切换。

This completes the setting procedure.

This completes the setting procedure.

This completes the setting procedure.

This completes the setting procedure.

This completes the setting procedure.

Advertising