7 vlan port configuration screen, Vlan port configuration screen -17, Vlan port – Enterasys Networks 6H2xx User Manual
Page 243: Configuration, Iguration screen, Section 8.7
VLAN Port Configuration Screen
802.1Q VLAN Configuration Menu Screens
8-17
Field Descriptions
for a functional description of each screen field.
8.7
VLAN PORT CONFIGURATION SCREEN
When to Use
To see and/or make changes to the port parameters affecting
•
the Port VLAN Identification (PVID) to reassign the port to a different PVID,
•
the acceptable frame type that the port will transmit or receive frames of VLANs other than the
static VLANs created on the switch,
•
the ingress filtering on the port, which can be enabled or disabled to filter out (drop) frames that
are not on the switch egress list, or
•
the GARP VLAN Registration Protocol (GVRP) status, which can be enabled or disabled.
Table 8-5
Current VLAN Egress Configuration Screen Field Descriptions
Use this field…
To…
Port
(Read-Only)
See a list of the ports associated with the VLAN ID shown in the line
above the Port and Egress lists.
Egress
(Read-Only)
See the current egress setting (UNTAGGED, TAGGED, or NO) for
each port.