Parkside PWS 125 A1 - Manual (Page 15)

12 PWS 125 A1
GB
Sanding sheets for sanding
wood/rock with dimensions: ø 115 mm/125 mm
NOTE
► Can only be used in conjunction with the
support plate!
Cup brushes, wavy wire
with dimensions:
ø 75–100 mm
Rotational speed: min. 12000 rpm
Cup brushes, knotted wire
with dimensions:
ø 75
Rotational speed: min. 12000 rpm
Disc brushes, knotted wire
with dimensions:
ø 115 mm
Rotational speed: min. 12000 rpm
Maintenance and cleaning
WARNING! RISK OF INJURY! Switch
the appliance off and remove the
power plug before starting any work.
■ Do not use any sharp objects to clean the
appliance. Never permit fl uids to penetrate
inside the appliance. The appliance could be
damaged. The carbon brushes should only be
replaced by the service centre or an authorized
specialist workshop. Apart from this, the appli-
ance is maintenance-free.
■ Clean the appliance regularly, preferably im-
mediately after completion of the work.
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic.
■ A vacuum cleaner is required for thorough
cleaning of the appliance.
■ Ventilation openings must never be obstructed.
■ Remove any adhering swarf with a brush.
NOTE
► Unlisted replacement parts (such as carbon
brushes, switch) can be ordered via our
service hotline.
Disposal
The packaging consists of environmentally
friendly material. It can be disposed of in
the local recycling containers.
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
fed into an environmentally compatible recycling
process.
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance.
IB_102828_PWS125A1_LB4.indb 12 22.08.14 12:03