Curtis IP9844 - Manual (Page 11)

11
Quick Starting Guide
1. Connecting to an External Power Source
Connect the power adapter (supplied with the player) to the side input and to a wall
outlet. Do not use any other device otherwise specified by your dealer.
2. Open the protective cover
The cover opens to a maximum 135 degree only, so please do not try to open it any
further.
3. Press the open button to open the disc cover
4. Inserting a DVD disc
Align the center of the DVD disc with the center of the disc guide. Press gently
down on the DVD to snap the disc into place, and then close the disc cover.
5. Slide the side power switch to ‘ON’.
6. Press the PLAY button on the player face
In general, the DVD already inserted into the player will start reading automatically
when power is turned on.
The DVD player will immediately start rendering the DVD program.
When you want to stop, press the STOP button, it will return to the power-on logo. To
power off the unit, slide the ON/OFF switch.
Connecting to an External Power Source
USING THE CAR ADAPTER
Plug the small end of the car adapter into the DC IN jack and then plug the other end
into the cigarette lighter socket. This indicator lights when the power is on.
HOW TO USE DC IN JACK
Use DC IN JACK to connect power adapter or car adapter to provide power for player.