Adjusting the barometer, Using the altimeter – Auriol Z29592 User Manual
Page 24
24 GB
©
Adjusting the barometer
In order to ensure a measurement that is as precise as pos-
sible, the barometer has to be adjusted. Contact your local
weather service for precise information regarding air pressure.
Entering incorrect data could lead to errors in measurements
carried out at a later date.
˽
Press the ALTI / BARO button
3
as often as necessary
until hPa (hectopascal), mb (millibar) or inHg (inches
of mercury) appear in the display
5
.
˽
Press the MODE button
2
for about 2 seconds. The
air pressure display will flash.
˽
Press the RESET
1
and ST. / STP.
4
button to set the
value you want.
˽
If you enter incorrect information, press the MODE
button
2
again and enter a new value.
˽
Press the ALTI / BARO button
3
to stop the adjustments.
©
Using the altimeter
CAUTION! Never use the altimeter on an aeroplane.
Note: If the height measured is more than
9164 m / 30065 ft, “HI” will appear in the display
5
.