Auriol Z29592 - Manual (Page 25)

25 GB
Note: If the height measured is less than - 706 m / - 2316 ft,
“LO” will appear in the display
5 .
˽
Press the ALTI / BARO button 3 until ALT appears in
the display 5 .
˽
Press the ST. / STP. button 4
for 2 seconds to choose
between the units of meters (m) and feet (ft).
Note: The weather station automatically updates the
altimeter.
© Adjusting the altimeter
The absolute elevation reading is measured by means of the
change in air pressure. In order to ensure a measurement
that is as precise as possible, the altimeter has to be adjusted
from time to time. Make sure that you adjust the altimeter in
a place that lies at sea level (0 metres) or at a place whose
height above sea level you can enter as a reliable reference.
Imprecise details could lead to errors in later measurements.
˽
Press the ALTI / BARO button 3 . ALT will appear in
the display 5 .
˽
Press the MODE button 2
for 2 seconds. The altimeter
display will flash in the display 5 .