Auriol Z29592 - Manual (Page 26)

26 GB
˽
Press the RESET 1 or ST. / STP. 4 button to set the
value you wish to have.
˽
If you enter incorrect information, press the MODE
button
2 and enter a new value.
˽
Press the ALTI / BARO button 3 to stop the adjustments.
© Measuring the difference in height
The weather station measures the lowest and highest point
(e.g. on long walks).
˽
Press the ALTI / BARO button 3 until TRK appears in
the display 5 .
˽
Hold the RESET button 1 down until the altimeter
display indicates 0.
˽
Press the ST. / STP. button 4 at the start of your long
walk. The TRK in the display will flash.
˽
Press the ST. / STP. button 4 again when you get to
the end of your long walk.
˽
Press the RESET button 1 . The minimum and maximum
values of the height measurement will appear in the
display
5 .