Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) User Manual

Page 109

Advertising
background image

109

Appendix

Other

The wrong date and
time are displayed,
or the wrong date
and time are being
stored along with
image data.

The date and time setting is off. Set the correct date and time
(page 68).

The messages on
the display are in
the wrong language.

The wrong display language is selected. Change the display
language setting (page 69).

Images cannot be
transferred over a
USB connection.

1)The USB cable may not be connected securely to the

camera. Check all connections.

2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if

you connect via a USB hub. Always connect directly to the
computer’s USB port.

Language selection
screen appears
when the camera is
turned on.

1)You did not configure initial settings after purchasing the

camera or the camera may have been left with a dead
battery. Check the camera setup (pages 27, 68).

2)There may be a problem with the camera’s memory data. If

this is the case, perform the reset operation to initialize the
camera’s setup (page 70). After that, configure each setting.
If the language selection screen does not re-appear when
you turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.

There are various
indicators and
values on the
monitor screen.

The monitor screen shows indicators and other information
about shooting conditions and the image you are recording.
You can touch the “DISP” on the main screen to select what
information you want to include on the display (page 9).

Buttons are not
responsive right
after the power has
been turned on.

With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.

Images are not
displayed.

1)The camera is turned off.
2)There is no Bluetooth connection between the camera and

controller (page 25).

Problem

Possible Cause and Recommended Action

Advertising
This manual is related to the following products: