Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 13)

13
Quick Start Basics
.
To use the hinge unit as a stand
.
To change the shooting direction by 90 degrees
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
• Align the camera’s operation lamp with the C
mark on the hinge unit.
• The gray lines on the lens ring indicate the
orientation of the long dimension of the image
being shot.
.
To remove the hinge unit from the camera
1.
While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
Hinge Unit
Lens ring
[FREE] lever
Gray lines
A B C
A
[FREE] lever