Casio EX-FR10 (Camera: Ver. 1.00 and 1.01, Controller: Ver. 1.00) - Manual (Page 31)

31
Quick Start Basics
.
To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Turn off the camera before removing the
memory card. Removing the card while
the camera is on can result in recorded
images not being saved and even damage
the memory card.
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1.
Load a memory card (page 30).
2.
Turn on the camera and controller (page 25).
3.
Touch the “ ” (Home) icon.
4.
Touch “MENU”.
5.
Flick upwards and downwards until you find “Setup”, and then touch it.
6.
Flick upwards and downwards until you find “Format”, and then touch
it.
7.
Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
To format (initialize) a new memory card