Electrolux 318205134 - Manual (Page 5)

5 Features
Control panel
Broiling element
Oven rack support
Oven light
Glass oven door
Door
handle
Convection fan
Oven door latch
Broiler pan
Broiler pan grid
Oven racks
Oven rack sliders
Oven vent
Convection
roasting rack
Installing Oven Rack Supports
AlwAys instAll oven rACk sUpport before
tUrninG on the oven (when the oven is
Cool).
To install oven rack support, insert the supports
by pushing them downward into the two brackets on
each side of the oven interior, as shown below.
To remove the oven rack support for a self-clean
cycle, pull up the support to disengage them from the
brackets. If the rack supports are not removed, the
self-clean cycle won’t start.
Oven Rack Positions
This oven is equipped with ladder rack supports with
8 positions to accommodate precisely every mode of
cooking.
Rack positions
Position 1
(Non-SLIDING
rack only)
Oven Vents Location
The oven is vented above each door. When the oven
is on, warm air is released through the vents. This
venting is necessary for proper air circulation in the
oven and good baking results.
Oven Vent Warm Air