Electrolux 318205134 - Manual (Page 8)

8
OVEN
timer
on-off
+
hi
-
lo
1 3
0
2
4 5 6
7 8 9
user
pref CANCEL START
20
21
22
23 24
26 27
25
20. Oven Pad - Used to activate an oven cooking
mode.
21. User Preference Pad - Used to bring the user
preference menu in the display.
22. Timer on-off Pad - Used to set or cancel the
minute timer. The minute timer does not start or
stop cooking.
23. Cancel Pad - Used to cancel any functions
previously entered except the time of day and
Features
Control pad functions
the minute timer. Push Cancel Pad to stop
cooking.
24. Start Pad - Used to start all oven functions.
25. 0 thru 9 Number Pads - Used to enter
temperature and times.
26. - lo Pad - Used to lower the temperature and
times.
27. + hi Pad - Used to raise the temperature and
times.
Getting Started
Setting clock at power up Temperature visual display
When the unit is first plugged in, or when the power
supply to the range has been interrupted, the timer
in the display will flash with “ ClO 12:00”. The clock
cannot be set when the oven is on. If an invalid
time of day is entered, the control will triple beep to
prompt you to re-enter a valid time of day.
To set the clock (example for 1:30)
1. Press 1 3 0 pads to set the time of day to 1:30.
The pads HI or lO can also be pressed to raise
or lower the actual time displayed.
2. Press START to accept the changes or CANCEl
to start with a time of 12:00.
Your oven is equipped with a temperature visual
display. When a cooking mode is set, the actual
temperature will be shown in the display and
will rise as the unit preheats. When the unit has
reached its target temperature, a chime will sound
to remind you to place the food in the oven. This
feature will be active with some cooking modes;
bake, convection bake and convection roast.
The cooking modes which does not feature the
temperature visual display will be noted in their
descriptions.
NOTE: The lowest temperature that can be
displayed is 100°F.