Casio DT-X8 - Manual (Page 20)

E-18
15 CLR Key Used to clear one letter to the left of the cursor.
16 Strap Holes Used to attach neck strap and hand belt.
17 microSD Card Slot microSD card slot.
18 R Trigger Key Used to perform bar code reading.
19 L Trigger Key Used to perform bar code reading.
20 USB and Charging
Unit Mount Holes Used to attach the USB and Charging Unit.
21 Barcode Reader/
NFC Reader Laser light or LED light is emitted from this window that reads
bar codes.
When using NFC, hold the card or tag up to the reader.
22 Hand Belt Mount Used to attach the hand belt.
23 Extension Port Provided for future extension.
24 Battery Pack Cover
Lock Switches Used to lock the battery cover and to release.
25 Mount Holes These holes hold the terminal seating in the optional USB
Cradle or in the Ethernet Cradle.
26 Battery Pack Cover Used to cover the battery compartment that holds the battery
pack inside.
27 Reset Switch Used to reset the Handheld Terminal.
28 Power Supply/Data
Communication
Terminals Used to receive power provided by the USB Cradle, Ethernet
Cradle or USB and Charging Unit. Also used for data
communication.