Eaton Electrical QSNAP - Manual (Page 5)

Intelligent Technologies ( IT. ) QSNAP
Pub. No. MN05001001E 1
February 2002
Product Overview
Description
Cutler-Hammer Intelligent Technologies ( IT. ) QSNAP (QCPort Starter Network Adapter
Product) by Eaton Corporation is the result of a substantive engineering and marketing effort,
involving extensive customer input. This product has greatly increased functionality of the
Eaton’s Cutler-Hammer Intelligent Technologies (
IT. ) Electromechanical Starter with the
addition of enhanced features, such as jam, stall and underload. This single front-mount
device is a single QCPort™ (Quick Connect Port) device providing control and monitoring of
Intelligent Technologies (
IT. ) Electromechanical Starter application.
The QSNAP product line provides communication capability to the following Intelligent
Technologies (
IT. ) Electromechanical Starters.
Table 1: QSNAP Electromechanical Starter Connectivity Table
Table 2: QSNAP S751 Connectivity Table
This manual specifically addresses the QCPort Starter Network Adapter Product (QSNAP).
For further information on the IT. family of devices, visit our Web site at:
www.cutler-hammer.eaton.com/it
Notice
Because the IT. Starters use 24V DC for control and power, the
QSNAP can only be applied with the IT. family of starters.
Amperage
Rating
IEC
E101
E501
Frame
Size
NEMA
N101
N501
Frame
Size
18 Amp B 45 mm 00 45 mm
25 Amp 0
32 Amp
40 Amp C 54 mm 1 54 mm
50 Amp
65 Amp D 76 mm 2 76 mm
85 Amp
100 Amp
125 Amp E 105 mm 3 105 mm
160 Amp 4
200 Amp
250 Amp F 140 mm 5 140 mm
315 Amp
400 Amp
S751
All