Eaton Electrical QSNAP - Manual (Page 8)

Intelligent Technologies ( IT. ) QSNAP
4 Pub. No. MN05001001E
February 2002
Environmental Ratings
The following environmental ratings apply to the QSNAP.
Table 3: Environmental Ratings
Approvals/Certifications
The following approvals and certifications apply to the QSNAP.
Table 4: Approvals/Certifications
Catalog Numbering System
There is only one catalog number for QCPort connection to Eaton’s Cutler-Hammer Intelligent
Technologies (
IT. ) Electromechanical Starters. These starters include those listed in Table 1
on Page 1 .
The catalog number is QSNAP.
This part number includes the QSNAP and the starter interface board that connects the
starter and the QSNAP.
Note: When ordering QSNAP for Full Voltage Reversing, consult factory for the QSNAP
Auxiliary contact and jumper catalog numbers.
Note: When ordering a ground fault detector, consult factory for catalog number.
Category Description Specification
Transportation Temperature -50°C to 80°C [-58°F to 176°F]
Humidity 95% non-condensing
Storage Temperature -50°C to 80°C [-58°F to 176°F]
Humidity 95% non-condensing
Operating Temperature -30°C to 55°C [-22°F to 131°F]
Humidity 95% non-condensing
Altitude Above 2000 meters [6600 feet] consult factory
Shock 15 g’s half-wave sinusoidal 11 msecs
Vibration 5 – 57.5 Hz (100 – 17 msecs) @ 0.3 mm SA
57.5 – 150 Hz (17 – 6.7 msecs) @ 0.35 mm SA
Enclosure IP20
Standard Approval/Certification
UL UL508
CE
CSA CSAC22.2 No. 14-95