Casio Firmware Update - Manual (Page 2)

2
Introduction
This manual explains how to update your CASIO projector with the latest version of firmware (software
stored in flash ROM).
To check if updates newer than your firmware have been published
1.
Go to the website at the location below to check if any firmware updates have
been released for your projector.
http://www.casio-intl.com/support/download/
z If you find an update has been released, make a note of its firmware version number.
2.
While the projector you are using is projecting, press the [MENU] key to display
the Setup Menu.
3.
Use the [e] and [r] keys to select the “Operational Info” menu. On the window
that appears, note the number shown for “Version”.
z If the number of the updated version you made a note of in step 1 is greater than your
projector’s current version number, you can update the firmware if you want.
To get ready for firmware update
You will need to prepare the items listed below in order to update your projector’s firmware.
z A computer that satisfies the requirements described under “Minimum System Requirements”
below.
z USB Cable
Prepare a cable with connectors that match the ports on the projector and your computer.
z USB DRIVER for CASIO Projector (Driver required for the projector-computer USB connection)
z CASIO Projector Flash Loader (Special software for transferring the firmware update data from the
computer to the projector)
z Firmware data (.cpr) for your projector
Visit the website below to download USB DRIVER for CASIO Projector and firmware data to your
computer.
http://www.casio-intl.com/support/download/
Minimum System Requirements
Operating Systems : Microsoft ® Windows ® 8; Windows ® 7 SP1; Windows Vista ® SP2;
Windows ® XP SP3 (32bit)
Computer : IBM PC/AT or compatible that conforms to the requirements below.
z Microsoft ® Windows ® 8; Windows ® 7; Windows Vista ® ; or Windows ® XP
pre-installed
z CPU : Pentium ® M 1.6GHz or higher, or CPU recommended for operating
system being used
z Memory : Amount of memory recommended for operating system being used
z Display : Full-color display with resolution of at least 1024 × 768, which is
supported by above operating systems and the computer being
used.
z Input device : Keyboard or other pointing device (mouse or equivalent device
supported by above operating systems)