Casio Firmware Update - Manual (Page 4)

4
6.
Double-click the CASIO Projector Flash Loader file (PjFlashLoader_EN.exe) you
downloaded in step 1.
z This will display the CASIO Projector Flash Loader window.
7.
Click the [Choose] button.
8.
On the “Open File” dialog box that appears, select the applicable firmware data
(.cpr) and then click [Open].
z This will return to the CASIO Projector Flash Loader window.
9.
Click the [Upload] button.
z This will start transfer of firmware data to the projector. The projector’s POWER indicator will
go out to indicate that data transfer is in progress. The CASIO Projector Flash Loader window
on the computer screen will show a progress bar that indicates the progress of the transfer.
z The dialog box shown below will appear and the projector’s POWER indicator will flash amber
when transfer is complete.
Important!
Do not turn off the projector or computer, and do not disconnect the USB cable connecting the
projector and computer while data transfer is in progress.
10.
Click the [OK] button to close the dialog box.
11.
Exit CASIO Projector Flash Loader by clicking the close ( ) button in the upper
right corner of its window.
12.
Disconnect the USB cable connecting the projector to the computer, and then
unplug the projector power cord from the power outlet.