Casio CTK-860IN - Manual (Page 27)

Sampling Sounds and Playing Them on the Digital Keyboard
EN-26
You can use the following procedure to specify a sampled
tone number and delete its data.
1.
Press ct (FUNCTION) and then use the br
(10-key) [4] (o) and [6] (p) keys to display
“DELETE” (page EN-7).
2.
Press the br (10-key) [9] (ENTER) key.
3.
Use the br (10-key) [–] and [+] keys to select
the tone number of the data you want to delete.
4.
Press the br (10-key) [9] (ENTER) key.
This displays a delete confirmation message.
5.
Press the br (10-key) [+] (YES) key to delete the
data, or [–] (NO) or [7] (EXIT) to cancel the
delete operation.
• After the delete procedure is complete, “Complete” will
appear on the display followed by the screen in step 1
of the above procedure.
• For information about deleting individual drum sounds
in a drum sampling set, see “Editing Sampled Drum Set
Sounds” on page EN-24.
You can use the following procedure to protect each sampled
sound against accidental deletion.
1.
Press bn (TONE) and then use br (10-key) to
enter the tone number of the sampled tone you
want to protect.
2.
Press ct (FUNCTION) and then use the br
(10-key) [4] (o) and [6] (p) keys to display
“SAMPLING” (page EN-7).
3.
Press the br (10-key) [9] (ENTER) key.
4.
Use the br (10-key) [4] (o) and [6] (p) keys
to display “Protect”.
5.
Press the br (10-key) [+] key to turn on
protection.
Once protected a tone cannot be deleted.
A protected tone is indicated as shown below.
■ Saving Sample Data on an External Device
• Memory card (page EN-59)
• Computer (page EN-68)
Deleting a Sampled Sound
D E L E T E
Flashes
S 1 : O r
g
n l
Used memory
(Unit: Kbytes)
Remaining
memory capacity
S u r e ?
Protecting Against Accidental Deletion of
Sampled Sounds
P r o t e c t
* 1 : O r
g
n l
Protected
CTK860IN_A5_x1a_EN.indd 28 2014/07/10 18:06:40