Casio CTK-860IN - Manual (Page 54)

Recording Your Keyboard Play
EN-53
You can record up to five songs (numbered 1 through 5) in
memory. After that, you can select a specific song for
playback.
1.
Press bo (RHYTHM).
2.
Press cs .
A song number will appear in the upper left corner of the
display for a few seconds. While it is, use
br (10-key) to
specify the number of the song you want to record or play
back. The song number will disappear if you do not
perform any operation.
3.
Press cs to record, or bk to play back.
To stop recording or playback, press bk .
4.
Press cs twice to exit the recorder mode.
■ To delete recorded data
After step 2 of the above procedure, do hold down cs
(without pressing any keyboard key) until the message “Song
Del?” appears on the display. Press [+] (YES) to delete the
song, or [–] (NO) to cancel the delete operation.
This section explains how to play along and record along with
one of the Digital Keyboard’s built-in songs.
● The following operations and settings also are
recorded along with your keyboard play.
Tone number, song number, pedal operation, tempo,
VIRTUAL HALL, reverb, chorus, layer/split settings, pitch
bend wheel operation
• There can be only one recording of keyboard play with a
built-in song in recorder memory. Making a new recording
replaces (deletes) previously recorded data.
1.
Press bp (SONG BANK).
2.
Press cs .
This will enter playback standby.
3.
Press cs again.
This will enter record standby.
4.
Use br (10-key) to enter the song number you
want to assign to the recording.
Recording Two or More Songs,
and Selecting One for Playback
Example: Song 2
P l a
y
N o .
Recording while Playing Along
with a Built-in Song
Lights
Flashes
CTK860IN_A5_x1a_EN.indd 55 2014/07/10 18:06:46