Deck, Height adjustment instructions, Cleaning and maintenance – Powerplus POWXQG7570 LAWNMOWER 160CC 510MM EN User Manual

Page 12: Spark plug, Lubrication instructions, Cleaning

Advertising
background image

POWXQG7570

EN

Copyright © 2013 VARO

P a g e

| 12

www.varo.com

7.8

Deck

The underside of the mower deck should be cleaned after each use to prevent a build-up of
grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite
rust and corrosion, and may prevent proper mulching.The deck may be cleaned by tilting the
mower and scraping clean with a suitable tool (make certain the spark plug wire is
disconnected).

7.9

Height adjustment instructions

CAUTION: Do not at any time make any adjustment to lawnmower without
first stopping the engine and disconnecting the spark plug wire.

CAUTION: before changing mowing height, stop mower and disconnect
spark plug cable.

Your mower is equipped with a central height adjustment lever offering 10 height positions.

Fig 11
1.

Stop mower and disconnect spark plug cable before changing mower cutting height.

2.

The central height adjustment lever offers you 10 different height positions.

3.

To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down
to selected height. (Fig.11)

4.

All wheels will be in the same height of cut.

8 CLEANING AND MAINTENANCE

8.1

Spark plug

Use only original replacement spark plug. For best results, replace the spark plug every 100
hours of use.

8.2

Lubrication instructions

CAUTION: DISCONNECT SPARK PLUG BEFORE SERVICING.

1.

WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.

8.3

Cleaning

Advertising