Powerplus POWX0172LI DRILL/SCREWDRIVER 18V LI-ION EN - Manual (Page 11)

POWX0170LI, 0172LI, 0173LI & 0175LI
EN
Copyright © 2010 VARO P a g e | 11 www.varo.com
WARNING: Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts, they contain chemicals that can damage, weaken or
destroy plastic.
WARNING: Always wear safety goggles or safety glasses with side shields when using
compressed air to clean tools. If the operation is dusty, also wear a dust mask.
BATTERIES: The battery pack for this tool is equipped with a Li-ion rechargeable battery. Do
not disassemble battery pack and attempt to replace the batteries inside.
7.2 Chuck removal/replacement
7.2.1 Chuck removal:

Lock the switch trigger by placing the direction of rotation selector in center position.
Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws
securely. Tap the hex key sharply with a mallet in a clockwise direction. This will loosen
the screw in the chuck for easy removal.

Open the chuck jaws and remove the hex key. Remove the chuck screw, turning it in a
clockwise direction. Note: the screw has left hand threads.

Insert the hex key in the chuck and tighten chuck jaws securely. Tap sharply with a mallet
in a counterclockwise direction. This will loosen the chuck on the spindle. It can now be
unscrewed by hand.
7.2.2 (Re)tighten a (loose) chuck
The chuck may become loose on spindle and develop a wobble. Periodically check chuck
screw for tightness.
To tighten, follow these steps:

Lock the switch trigger by placing the direction of rotation selector in center position.

Open the chuck jaws.

Insert the hex key into the chuck and tighten chuck jaws securely. Tap the hex key
sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.
Note: The chuck screw has left hand threads.
7.3 Service
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
8 STORAGE
−
Store your tool in a clean, dry, frost free environment.
−
Battery storage

Store your batteries in a cool area. Optimal temperature for storing your Li-ion
battery for longer term is 2°C. (capacity loss wil l only be 6% / year (compared to
20% at 25°C)). Never store batteries in discharged condition.

It is better for Li-ion batteries to recharge them frequently. Optimal long time
storage charge for your Li-ion battery is at 40% of their capacity.