Emerson Radio ES30 - Manual (Page 20)

1 9
Pre-setting Stations In The Tuner Memory
This system includes a 20 station preset memory. You can store up to 10 FM
stations and 10 AM stations in the tuner memory for immediate recall. The procedure
for storing stations in memory is as follows:
1.) Follow step 3 under “Listening To The Radio” in page 17 to select the first
station you wish to memorize.
Example: FM 103.5 MHz.
2.) When the desired station appears on the display press the MEMORY button
on the front panel or the remote control.
The Channel # “01” indicator
appears and the “MEMORY”
indicator flashes in the display.
3.) Press the MEMORY button on the front panel or the remote control once
more to enter the station in preset memory channel “01”.
The MEMORY indicator stops
flashing.
4.) Tune to the next station you wish to memorize. Example: FM 106.70 MHz.
Press the MEMORY button.
The “MEMORY” indicator flashes
again.
5.) Press the REPEAT/M-UP button
on the front panel or remote
control to select preset memory
channel “02”.
Then press the MEMORY button
to enter the desired station in
preset memory channel 02.
6.) Repeat steps 4 and 5, selecting a different preset memory channel number
each time, until you have entered up to 10 FM stations in the tuner memory.
7.) Press the STOP/BAND button to select the AM band and follow the same
procedure to enter up to 10 AM stations in the tuner memory.
ES30_072905.p65 29/7/2005, 16:41 19