Emerson Radio ES30 - Manual (Page 21)

2 0
Recalling Preset Stations
1.) Turn the unit ‘On’, press the STOP/BAND button to select the desired band.
2.) Press the REPEAT/M-UP button on the front panel or the remote control
repeatedly to scroll through the preset memories until the display shows the
desired station.
3.) You may also use the number buttons on the remote control to directly select
the desired preset memory number.
Simply press the corresponding number key on the remote handset to select
preset memory numbers 1 through 0 (10).
Changing Preset Stations
To change any preset station memory:
1.) Select the desired band and tune to the new station you wish to memorize.
2.) Press the MEMORY button and then press the REPEAT/M-UP button to display
the memory number you wish to change.
3.) Press the MEMORY button again to enter the new station in the memory. The
new station is memorized and the previous station is deleted from the memory.
ES30_072905.p65 29/7/2005, 16:41 20