Emerson Radio ES30 - Manual (Page 35)

3 4
Note: The plastic legs must be removed from the main unit before wall
mounting. To remove the legs, slide them downward as shown.
To re-attach the legs, slide the U-shaped cut-outs in the legs upwards over the
round posts at the back of the unit. Make sure the legs are pushed up all the way.
If you decide to wall mount your ES30 audio system please read and
carefully follow these instructions:
Note: Wall mounting hardware is not included.
You should purchase the appropriate type of anchors for the wall where the
unit will be mounted. (Solid-wall, Hollow-wall, etc.) Wall anchors are available
at hardware stores and home improvement centers. Tools required: Electric
drill, Hammer, Screwdriver.
WALL MOUNTING INSTRUCTIONS
ES30_072905.p65 29/7/2005, 16:41 34