Speaker connections – Emerson Radio ES30 User Manual

Page 7

Advertising
background image

6

Speaker Connections

Connect the speakers to the Red (+) and Black (–) terminals on right side panel of

the unit as shown below.

Press the Red (+) or Black (–) terminal tab, insert wire, release tab to hold wire in

place.

The speakers may be placed close to the main unit or as far apart as the cables

will allow. Please leave a gap of at least 1/4” between the main unit and speakers

to prevent any vibration in the speakers from causing the CD player to skip.

Note: The speakers are not magnetically shielded. They should not be placed

directly on top of, or next to, a TV set. The magnets in the speakers could

cause color distortion on the TV screen if the speakers are too close to the

TV.

The entire system may also be wall-mounted if desired. Wall-mounting

instructions can be found at the end of this manual.

ES30_072905.p65

29/7/2005, 16:41

6

Advertising