Edimax Technology AC-M1000 - Manual (Page 53)

Edimax AC-M3000/AC-M1000
User’s Manual
51
y 802.1X Authentication: When enabling this function, the hyperlink of Radius Client List will appear. Click the
hyperlink to get into the Radius Client Configuration page for further configuration. In the Radius Client
Configuration page, the clients, which are using 802.1X as the authentication method, shall be put into this
table. Edimax AC-M3000 will forward the authentication request from these clients to the configured Radius
Server.
y Trans Full Name: When enabled, both the ID and postfix will be transferred to the RADIUS server for
authentication. When disabled, only the ID will be transferred to RADIUS server for authentication.
y NASID: Enter the NASID of the Edimax AC-M3000 for the RADIUS server.
y Server IP: Enter the IP address/domain name of the RADIUS server.
y Authentication Port: Enter the authentication port of the RADIUS server and the default value is 1812.
y Accounting Port: Enter the accounting port of the RADIUS server and the default value is 1813.
y Secret Key: Enter the key for encryption and decryption.
y Accounting Service: Choose to enable or disable the accounting service for accounting capabilities.
y Authentication Protocol: There are two methods, CHAP and PAP, for selection.
y Edit Policy Mapping: Click the hyperlink of Edit Policy Mapping to enter the Policy Mapping page. Choose to
enable or disable policy mapping by RADIUS class attributes.