Edimax Technology AC-M1000 - Manual (Page 96)

Edimax AC-M3000/AC-M1000
User’s Manual
94
The Interface and AP Access configuration is the same as the settings mentioned above. Click “Configure”
button for more Auto-Discovery functions. A selection known as “Interval” can be selected from the drop-down
box, and the system will scan periodically according to the its setting (the default value is 10 minutes). If
Auto-Add AP is enabled, a new detected AP will be assigned an available IP address from the IP address range
set in Interface and applied with the selected template.
4.3.3 Manual Configuration
The supported APs can also be added manually. Enter the related information of the AP and select a Template.
Click ADD and then the AP will be added to the AP List.