2 ap discovery – Edimax Technology AC-M1000 User Manual
Page 93
Edimax AC-M3000/AC-M1000
User’s Manual
91
4.3.2 AP Discovery
Use this function to detect and manage all the supported APs in the network segments.
y To discover AP manually, please fill in the required data.
¾
Interface: Check Uncontrolled or/and Controlled and enter the Base IP and Pool Size (the discovered
APs will be given an IP address among the pool).
¾
AP Access: Input the IP Address Range of the AP to be discovered, (the default is
192.168.2.1/192.168.2.1), ID (the default is admin) and Password (the default is 1234) of the AP.
Then click the Discover button and the APs that match the given settings will show in the Discovered AP List
below. If any IP address among the IP range assigned for a specific AP is used, there will be a warning message
showing up. Please change the Base IP or Pool Size of the desired Interface to provide available IP addresses